Technical data | |
Filter media | Polyether sulphone |
Core / external cage | Polypropylene |
Adapter | Polypropylene |
Filter fineness | 0.04 - 1.2 µm |
Working temperature | max. 80 °C |
Differential pressure | max. 5,5 bar at 20 °C / max. 1,7 bar at 80 °C |
Dimensions | |
Lengths | 5 to 40" |
Outer diameter | 69 mm |
Inner diameter | 28 mm |
Sterilisation | |
Autoclav | 121 °C, 30 min, 10x |
Steam | 121 °C, 30 min, 10x |
Hot water | 80 °C, 30 min, 30x |
Integrity test-data | |||
Fineness | Bubble-Point | Diffusion rate | |
0.04 µm | 3.1 bar* | 25 cc/min | 4.5 bar |
0.10 µm | 2.3 bar* | 40 cc/min | 4.5 bar |
0.20 µm | 2.5 bar | 35 cc/min | 2.0 bar |
0.45 µm | 2.5 bar | 20 cc/min | 1.6 bar |
0.65 µm | 1.2 bar | 20 cc/min | 0.9 bar |
* Bubble-Point with 60% IPA, 40% DI-Water
SFL Type | 20 Length (inch) | (mm) | PP Core | 000.2 Fineness(µm) | -7 Adapter | E Seal |
SFL | 4 7/8 | 124 | PP = Polypropylene | 0.04 | X = DOE | E = EPDM |
5 | 127 | 0.1 | 3 = 222 OR / closed | N = NBR | ||
9 3/4 | 248 | 0.2 | 7 = 226 OR / Fin | S = Silicone | ||
10 | 254 | 0.45 | 8 = 222 OR / Fin | V = Viton | ||
19 1/2 | 496 | 0.65 | ||||
20 | 508 | 1.2 | ||||
30 | 762 | |||||
40 | 1016 |
Example: SFL 20PP000.2 -7E
All specifications refer to our standard product range. Due to constant technical developments, this information may change at any time without notice.
You cannot find what you are looking for? Do not hesitate to contact us.
Macie Państwo pytania na temat naszych produktów lub chcielibyście skorzystać z porady? Nie ma problemu, prosimy o bezpośredni kontakt z nami.
Z przyjemnością pomożemy!